Antarmuka setelan printah produksi Realtek 9601D

 

1. Impor file wewenang MAC (impor file wewenang MAC dhisik, banjur ubah alamat MAC sawise sukses ngimpor)

jeneng berkas wewenang alamat ftp akun ftp sandi ftp #Impor file wewenang MAC Contone: wewenang en1234_3456 192.168.1.23 ont.

 

 

2. Ngowahi alamat MAC, GPON SN, informasi pabrikan, lsp.

lampu kilat njaluk ELAN_MAC_ADDR 11223390EB23 #Modify MAC address

lampu kilat njaluk DEFAULT_DEVICE_NAME GPON123 #Modify jeneng piranti

flash njaluk PON_VENDOR_ID GYTY #Modify Produsèn ID, kudu 4 digit

flash entukGPON_SN GYTY3390EB23 #Modify GPON sn: dawane kudu 12 byte, 4 byte pisanan minangka ID pabrikan

lampu kilat njaluk HW_HWVER R1.2.3 #Set nomer versi hardware

lampu kilat njaluk HW_SERIAL_NO 4857544348CDDE9A #Ngowahi nomer SN

3. Lampu indikator lan test tombol

led test start #Ketik tombol deteksi lan mode test lampu indikator

led test allledon #Kabeh indikator urip, kajaba lampu daya

led test allledoff #Kabeh indikator mati, kajaba lampu daya

cat /proc/led_test #Button detection, pencet tombol kanggo 2~3s, maca printah, lan bali RESET sukses!, nuduhake yen tombol OK

led test stop #Lampu indikator bali menyang mode normal

4. Reset pabrik

mimpin test reset // Factory reset Sawise nglakokaké printah iki, piranti bakal kanthi otomatis miwiti maneh

5. mriksa wewenang alamat MAC.

wewenang njaluk status #Priksa apa alamat MAC sah, ngowahi alamat mac lan miwiti maneh lan takon maneh; MAC Wewenang saka auth1, Wewenang Sukses!

 

kucing etc / vendor